404 · CONNECTION LOST · A SMALL DISTRACTION.
We’re good at fixing tech. Finding this page? Apparently less so.
Try a little hands-on troubleshooting while you’re here.
Or play a minigame below ↓
SIGNAL RESCUE
Click or tap a cable tile to rotate it clockwise. Connect IN to OUT using every tile. Correct tiles turn green immediately when connected back to IN. Use Test signal to locate a fault. Each scramble varies the route.
Live green = correct & connected · After testing: gold = first fault
SOME ASSEMBLY REQUIRED
The service manual is missing. Fit six parts by their function and shape. Sockets are numbered, not labeled. Drag a part, or select it and tap a bay. Power on runs diagnostics; tap an installed part to remove it.
PARTS TRAY
CS–404 / JUNIOR TECHNICIAN
PLEASE LABEL YOUR CABLES
Connect the router uplink, then patch all three workstations through the patch bay. Internet and equipment power are already connected. Drag between ports or tap two ports to connect them. Drag an occupied port to move that cable end. Leads follow your pointer and settle into tidy curves when connected.
All four connections are available. Internet, power and the permanent office cables are already installed.
Permanent building cabling → office wall jacks → PCs. Each PC needs its own switch-to-patch-bay lead.
Patch bay → permanent building cables → three office workstations.